|
Build your own custom R/C system! |
 |
 |
 |
|
Written by Gordon Anderson
|
|
Sunday, 16 August 2009 06:27 |
|
The MicroStar 2000 is an 8 channel Radio Controlled Transmitter design that you can build and use to upgrade your favorite old transmitter. The transmitter shown is a Proline Custom Competition radio that I have upgraded. This design consists of two major components, the Encoder, and the RF Deck.
|
|
Last Updated on Sunday, 16 August 2009 18:32 |
|
Read more...
|
|
|
Written by Gordon Anderson
|
|
Sunday, 23 August 2009 15:00 |
|
Jon Crick has updated the Encoder design and added USB support on board. The new Encoder is the same size and the connectors are in the same location as the rev 4.0 Encoder. Functionally the Encoder is the same and you have on board jumper options that allow you to select what mode of operation you would like to use.
|
|
Last Updated on Saturday, 29 August 2009 05:00 |
|
Read more...
|
|
Written by Gordon Anderson
|
|
Sunday, 21 February 2010 05:02 |
|
Comprehensive helicopter support has been added to the MicroStar with firmware version 2.0n. This document provides an overview of the new helicopter features. The helicopter support includes 4 flight modes or flight conditions that are available when you enable the helicopter option. The flight modes are:
|
|
Last Updated on Sunday, 21 February 2010 05:08 |
|
Read more...
|
|
|
Written by Gordon Anderson
|
|
Sunday, 16 August 2009 17:31 |
|
This paper will introduce the Encoder electronics from the hardware design standpoint. I will reference the component designators on the schematic and I assume you have a hardcopy of the schematic for reference.
|
|
Last Updated on Monday, 17 August 2009 20:28 |
|
Read more...
|
|
Adjusting the joystick pots with an ohmmeter |
|
|
|
|
Written by Gordon Anderson
|
|
Sunday, 16 August 2009 19:59 |
|
The MicroStar Encoder joystick pots can be adjusted and centered using an ohmmeter. This procedure will allow you to set all of the pot positions as you assemble the system. Here is the procedure:
|
|
Read more...
|
|
|
|
|
|
|
Page 1 of 2 |
MicroStar 2000
